...and (http://searchnetworking.techtarget.com/tip/0,289483,sid7_gci1140584,00.html) which specifically talk about asdm ...
network connection, select the one corresponding to the NIC to which the SG unit is attached. 3 Select Internet Protocol (TCP/IP) and click Properties. The Internet Protocol (TCP/IP) Properties dialog
...IP address you put in. You should be aware that doing the above opens a direct access point into your network! Port 25 is the port used for SMTP (Sendmail) and it is the most vulnerable and most ...
network and have no problems wih that. We have put up the FTP_passtrough rule from LAN to CORE. Any idea what could be te problem? There are 2 ports used for FTP. They are 20 and 21. When you initiate
...ip address from the modem. From there, if you have the disk, install it and run it on your laptop/pc. This will give you a network monitor and make it alot easier to connect. If you ...
Question about Cisco Computers & Internet
network through Verizon DSL modem (without Routing Capabilities), Cisco Pix 501 firewall, Cisco Catalyst 2950 24-port Switch. i Believe the server is running RAS and Possibly Terminal Services. I know
...IP to 192.168.1.2 and use 192.168.1.99 for the DFL-500) Here are some sample boot messages: FGT-50(11.04.2002) Ver:02080001 SerialNum:FGT-XXXXXXXXXXXX SDRAM Initialization Scanning PCI Bus...Done. ...
57 questions posted
Usually answered in minutes!
25 Questions
15 Questions
22 Questions
1 Questions