ASUS P5LD2-VM Motherboard "fan control" Questions

control my fan speed(cpu fan and chassis fan) in any way.... i tried the asus motherbord software it doesnt work, i try settings in the bios(cool and quiet and other options) and it doesnt work either

...when attached it rolled then stop in seconds continuously Fans are Controlled by Temperature Control Setting of the Mother board. So the Fan controller is a function of the BIOS of the Mother

...fan control to work you must be using the type of fan that has at least three wires in the connector plug (if it has four wires that is ok too) but if it only has two wires then it will not works ...

control over the fan, or you could buy a fan controller and hook all your extra fans to it. Hope this helps & please take a moment to rate my solution fixya. Thanks. Dave, Your motherboard has a 4 pin

Fan Control Settings. There you can set the fan to rotate at max RPM all the time, like in your case or to set the automatic control of the fan. You must set the temperature when the fan must start to

...2300rpm.my motherboard is dp965lt.core2.memory 800mhz There is usually something in the BIOS settings that control the speed of the fan at certain temperatures. check those. Set it on auto if you ...

...for you need to go into the bios and look for the bios setting for overclocking there you shoul find fan speed control you can usually fing it in the chipset configuration NO BOOT DEVICE ...

control fan speeds of your PC. Please click on this link--->http://www.filehippo.com/download_speedfan/ and choose download latest version in right corner. 3. Download and install Speedfan which is

the fan that I needed but it is 3 pin. Can I use the 3 pin cpu fan connector with this board? Yes, it will work, just that the fan control will be missing and the fan will run at full speed constantly

my fan for P4i65G is not fully powering up, power otherwise is fine Does your computer run? If it does it could be the onboard fan controller that is controlling the fan at the required speed.