Whirlpool LGB6300 Gas Dryer "smell drum area" Questions

...smell as well - it is a 6806 Model you must disassemble the unit and clean the lint out of the heating unit area, it is lint catching fire and could be dangerous to continue using ...

drum turns but rattles and smells the roller has a bad bearing that is mounted on the belt tensioner. Replace the belt and the roller as well to get your dryer running like new again. You will have to

...drum is turing, however after a while there is a burning smell. Is the burning smell like plastic? If so read on. The belt runs on a spring steel plat tensioner with platic wheels of course. Plastic ...

drum roller that has frozen up causing the rubber smell. Your idler pulley could be frozen up and the belt is slipping on the drum. Go to this link http://www3.sears.com/ and post your model number to

drum rides. Metal, plastic, and lint have distinct smells, and you should be able to determine which one(s) you have by smell. Lint is a common burner in dryers, and it seems you've looked in some

...drum does not turn and a smell like burnt rubber is around the area, although I can spin the drum by hand freely. There is no error appearing. But when the start button is pressed you can hear it try ...

...in that motor switch area it stays on the run winding.pop the top .remove the frount.pull drum.vacume motor out if then starts on own great.other wise you need new motor.parts about 100$God ...

...drum. This will heat up the belt causing the smell. If the belt gets too loose, this will happen. I'd replace the belt, and I think you'll be back in action. Let me know what happens. Please rate ...