Whirlpool LGB6300 Gas Dryer "heating flame" Questions

Ad

...heating element If the dryer doesn't heat, the igniter might be burned out. Check the igniter for continuity with an ohm meter. Dryer igniters burn out over time. Gas dryers have a flame sensor to ...

Ad

Gas dryer runs but no heat. Took it apart cleaned all ducts and lots of years worth of dirt out of entire machine, looks brand new. Tested all components. Thermal fuse, heat and flame sensors tested ...

Ad

Question about Frigidaire Dryers

1 Answer

Why won't gas dryer heat up Won't heat up and dry Check the circuit board that makes the spark to light the flame. Under normal operation, the board opens the gas valve for a very short period of time

Question about Whirlpool Dryers

1 Answer

...heating sporadically. In Auto dry cycle, control doesn't move as possibly not getting hot enough? on time dry dryer not hot enough. Remove the lower front panel and turn dryer on. The ignitor should ...

intermittant heating.It will begin to glow....sometimes the flames shoot out for a short time....but then go out. Then, it will continue to glow red without flames igniting,then goes dim....couple ...

...heat element got hot and produced a flame. The flame went out and will not come back on. Heating element continues to cycle on and no flame. Vacuum out the intake and exhaust passages for the

My dryer heats up when running about 10 minutes then the flame shuts down. It takes about 25 minutes to run and the flame goes on but same problem as above. The Model is a DG410. usually when this ...

Question about Roper Dryers

1 Answer

heats but wont stay heated If the flame come on to start with, but then goes out and won't come back on I would suspect you have a bad coil on the gas valve. If you see the flame cycle on and off,

when i ignite jet the flame does not continue it goes out after about five minutes. Will the heat continue to build up to the temperature that is required the flame is the heat source no flame -no ...

Question about Dryers

1 Answer

Dryer starts, but does not heat up. Igniter ignites, but no heat. Gas to rest of house is operable. Hello, Thier are 2 possible things causing it not to heat. 1) The flame sensor is bad..if the ...

Not finding what you are looking for?
Whirlpool LGB6300 Gas Dryer Logo

211 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Virgil Watts

Level 2 Expert

267 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...