Won't start. Light are lit, but the 'start' button does nothing. If the display shows an '88' then place a heating pad over the display. In a few minutes the '88' code will clear, and the dryer will ...
Question about Maytag Dryers
Is it the dryer or the electrical? When the 88 displays, put a heating pad over the display - it will be ready in just a few minutes. Sounds crazy, but it works every time. May take up to 30 or 40 min
Display flashes 88:88 and won't start http://www.retrevo.com/support/Electrolux-EIGD55H-Dryers-manual/id/23220bh550/t/2/ Error codes explained in manual above. http://www.repairclinic.com/Dryer-Repair
The LCD display screen is blinking 88:88 and all the buttons are blinking blue You might have to reset the machine. Unplug the machine for 30 seconds and plug it back in
Question about Maytag Dryers
when power came back on, getting 88 on digital display but won't reset 88 is diagnostic mode. just press cancel or push power again. that will reset it back to normal use.
...displays 88..88 on the LCD and none of the buttons are responding to inputs. Any ideas on how to reset the problem. I have the same dryer....u have to unplug it for 30 minutes NOT 30 SECONDS to reset ...
Hi My Neptune gas dryer tries to start for a split second then flashes 88 and goes into complete shutdown then the display comes back on. Any suggestions? Thanks in advance. The "88 error code" is for
88 displays, put a heating pad over the display - it will be ready in just a few minutes. Sounds crazy, but it works every time. I think 88 is a key stuck error. Look at the following link: http://www
no buttona work on the board just says 88 The 88 in the display most likely means you have a stuck or shorted keypad. If the control senses a keypad pressed for more than 75 seconds then it will ...
260 questions posted
Usually answered in minutes!
1,123 Questions
940 Questions
790 Questions
219 Questions