Whirlpool LER4634J Electric Dryer "replace thermal switch" Questions

...Replace the lever, if broken. Note: Door switch actuator lever usually comes with the door switch assembly and it is recommended to get the whole assembly since there is almost no price difference ...

thermal switch A thermal fuse blows (opens) when the temperature is above the set value.  When is blows it will have to be replaced before the circuit is operational again.  A thermal switch

...than a new timer switch which was not the cause it was a thermal switch that went bad , FYI to other dryer owners to check the thermal switch  and door switch before replacing timer switch

fail, it can blow the fuse. Also, if your heating element is shorting to ground, it will blow the thermal fuse. It is standard practice to replace the high and low limit switches with the thermal fuse

...to replace a hi-limit thermostat when replacing a thermal fuse. 4. Timer or control board Replace if defective (note: uncommon problem). **The most common issue here will be a defective Thermal ...

...dryer manufacturers to replace a hi-limit thermostat when replacing a thermal fuse. 4. Timer Replace if defective (note: uncommon problem). **The most common issue here will be a defective Thermal ...

manufacturers to replace a hi-limit thermostat when replacing a thermal fuse. 4. Timer Replace if defective (note: uncommon problem). **(((The most common issue here will be a defective Thermal fuse))

...to replace a hi-limit thermostat when replacing a thermal fuse. 4. Timer or control board Replace if defective (note: uncommon problem). **The most common issue here will be a defective Thermal ...

REPLACE THE THERMAL FUSE AND CHECK FOR PROPER OPERATING TEMPS.APPROX 160-175DEGREES FAHRENHEIT. IF IT GOES BEYOND 220 DEGREES, REPLACE THE CYCLING THERMOSTAT LOCATED BESIDE THE THERMAL FUSE. THE OTHER

...replace thermal fuse you can test it with a multimeter. Could also be the door switch, If you have a multimeter take one wire off that switch and check for continuity both in or out if none then ...