...Heater Relay failure Heater relay stuck open or closed; Wiring defective Check for short circuit across heater relay(s) (RL5, RL6, RL7) or L1 applied to heater relay output(s) (J5-2, J7-1, J7-3) with ...
Question about Dryers
...Heater Relay failure Heater relay stuck open or closed; Wiring defective Check for short circuit across heater relay(s) (RL5, RL6, RL7) or L1 applied to heater relay output(s) (J5-2, J7-1, J7-3) with ...
Question about Kenmore Dryers
...heater relay. You can actually use the motor relay to test if the heater relay is bad, by switching them around. They are interchangeable! Below is a parts layout for reference. Unplug power Then pry ...
...heater relay located behind the console. Disconnect power to the washer then remove the screws attaching the console rear panel to the console. The are two relays behind the console; the one with the ...
heater relay and the motor relay, both of which are identical relays. If the motor relay is broken, you have the switch problem. If the heater turns on and then goes off for several minutes or longer,
Question about Frigidaire Dryers
...heater relay(s) (RL5, RL6, RL7) or L1 applied to heater relay output(s) (J5-2, J7-1, J7-3) with cycle stopped. Check for open circuit between L1 and heater relay connection(s) (J5-1, J5-3, J7-2). If ...
...heater relay relay is burnt..second time this has happened in a year..main pump still works lights work . just the heater does not.when you turn up the thermostat you can hear it click inside...what ...
...heater relay f08 light 1. heater relay f09 lights 1&4 eprom/setup error f10 lights 1&3, pressure switch not sensing f11 lights 1&3&4, pump/draining error f12 lights 1&2, ...
...of the heating coil of that the program controller has failed to trigger the relay to the heater. Use a multimeter to confim the voltage to the heater relay , check the continuity of the heater
1,268 questions posted
Usually answered in minutes!
940 Questions
790 Questions
215 Questions
219 Questions
