...post! Based off the information you have provided, I understand that your Frigidaire dryer is displaying an "E52" code and the dryer will not start. Typically an "E52" code stands for motor fault, I ...
Question about Frigidaire Dryers
...has a error "E63" listed on the window. What error is this in reference too? I appreciate your post, Aeraci Los Fresnos! From the information you have provided your Frigidaire dryer is providing ...
...repair scope, cost, etc? HI. I will need the entire model number, if possible. This will allow me to pull up the proper prices and part number needed for the solution. There are two possible culprits ...
cycle but does not create any heat therefore the clothes don't get dry.What could be the problem? I posted this earlier to another person, but the answer is the same. Give this a try: If the drum will
...the right hand side. Plug the dryer back in and test to see if there is 240V going to the element posts. If there is voltage, but no heat, change the element. If it does not get voltage, you need
...Stand back and watch the heating element with the dryer running. If it is glowing and intermittently shutting off, this is NORMAL. You probably have a clog some where INSIDE the dryer. You will need ...
...post and I follow the instruction to reset the thermostat. It worked. Fixya! Global appliances service is a liar. Nerver do bussiness with them. There is a reset button on the thermostat which can be ...
...post and replaced the Thermal cut-off, part AP3094323, that did not fix it so then I replaced the heater element part AP2947033, that did not fix it either. I am tired of guessing as it is costing me ...
4 questions posted
Usually answered in minutes!
640 Questions
525 Questions
217 Questions
197 Questions
121 Questions