GE Profile 30" Double Wall Oven PT925 "cook top fault" Questions

...cook temp and time and now for about 3 months the top oven has been cutting off in the middle of cooking and then giving us an F1 & F3 Error. Concerning the F3(Open or shorted oven temperature ...

...top with four cooking areas. Hi,you can use the link below for all codes for cooktops and solutions http://www.appliancepartspros.com/repairtips/repairtips_appliance+fault+codes.aspx Hope it

...cook. the food is usually still uncooked but the initial heat has slightly cooked it . i can put my hand in oven as it is not that hot. engineer says its not oven door switch its probably thermostat ...

...or thermostat that may be at fault HI thanks for your question. there is a oven sensor , located in the oven, top left corner. replace this part. thanks the appliance doc. please rate my answer. ...

...top element turns on even if you only are cooking with the bottom oven. Although fault code "F6E6" most often indicates a communication failure between the User Interface and Appliance Manager board ...

...top burner was real red and you couldn't turn it off. I even unplugged it and then plugged it back in and that still didn't work. Hi Krista, Unfortunately, F1 is a fault code for a failed electronic ...

...top on broil it will get red hot and seems to work fine but on bake it dosen't seem to get hot enough and is taking twice as long to cook things we have noticed the heat indicator continues to click ...

...top and bottom are OK as it works in normal mode.The fan is OK as this comes on when it should with the grill. It is just the one position on the selector switch which does nothing. I think it is a ...

...top oven in our double wall oven (Maytag), and without meaning to, hit cancel while the "lock" button was still flashing during the cooling-off phase. The oven is now locked, and won't open at all. ...

...top. Most modern ovens will display a fault code if the oven sensor is at fault. If you think the sensor may be the issue you can check the resistance with a multi-meter but will need to know the ...