Insignia NS- 27" TV27 TV "top folding" Questions

I HAVE A JVC AV27D302: THE PICTURE IS FOLDED OVER THE PICTURE IS FOLDED OVER AT THE TOP. IT STARTED OUT AS A SPACE AT THE TOP OF THE SCREEN AND AS THE THE SET WARMED UP IT WENT AWAY. NOW THE PICTURE ...

folding over top section of tv screen seems low. Top video is folded over like mirror image for a couple of inches. Looking for service manual + parts layout diagram I don't have a print for this set,

...folding picture I have a Magnavox 25tsc6 0101 and the picture is ''folded'' on the top and bottom making it hard to watch. Is there anything I can check or repair to fix this at a reasonable cost? Hi ...

Black bar top 1" screen The image that should be in top 1" is folded over inverted and superimposed on next to top 1" Rest of picture below this is fine. Dry capacitors on the vertical output

Tv picture is shrinking. the screen is getting smaller from the top the black bar is about 3 inches now. it looks like the top of the screen is folded over with a black bar at the very top Check for ...

27MT5005D vertical foldover vertical picture is shrunk at top and bottom with fold over at top You have bad capacitor(s) in the vertical circuit.

Lines at top of screen, about 4" Hi: This is due to vertical deflecton problem, there is some capacitors that has gone bad and need replacing. It might just be one cap rated at 100uf 35 volts. This is

...top 1" of the screen seems to be folding down What you are describing is a vertical problem, typically caused by the vertical deflection ic, a few capacitors, and bad solder connections, or a ...

phillips 27" flat tube tv The top of the screen looks as if the picture is folded over in to the picture, many fine lines in the upper part of the picture. At the very top of the screen, about 2 ...

top and is folding over, causing retrace lines to show on the screen. The reason why it comes and goes is because it is caused by a leaky cap in the vertical circuit. Replacing this capacitor will fix