...rear 2 legs are fixed. The front 2 are adjustable. There are lock nuts to prevent the adjustment from coming loose. The front legs are to be adjusted to the minimum. While not running if the machine ...
...bolts in the back of the machine. Read the manual- it will tell you how to do this. John Open the rear to see if any springs/shocks are loose or damaged, change. Disconnect wall socket first. Then ...
...rear. You will best do the job if you can move the machine away from the wall~! Get a simple wrench the size of the bolt/washer on each foot is the key. Another cause of a shaking washer may be the ...
...rear are not adjustable but the 2 at the front will be. Ensure that there is no way that you can rock the machine as you adjust and that the feet become more difficult to adjust/turn as they reach ...
my washer shakes very hard using the number 7 it starts to shake and make very loud noises One possibility is your have not levelled it correct. The rears are not adjustable. Tighten up the front ...
Banging sound during spin at rear area of machine Michine works fine except for banging sound. Removed top cover, both springs and shocks are in place. Sound is coming from in front of the driven ...
Question about Frigidaire Washing Machines
...and check to see if springs are connected. If all ok - depending on age of machine main bearing in rear could be bad, if so better to buy new machine. This washer is known to last about 5 yrs if ...
...washer and allow a gentle ride while spinning ,,, if they dont look worn or broken the you have a rear bearing and spider support problem and that may be little more than you want to spend on
Question about Whirlpool Washing Machines
...the locking nuts up tight to the underside of the machine so that they will not move. Ideally the rear feet should also be locked. (If this has not cured the problem it is possible that the
Question about Frigidaire Washing Machines
rear panel. There are 2 white pins that hold the shock in place (one on the tub and one in the bottom of the cabinet). There is a locking tab on each of the pins. The easiest way to get the pin out is
253 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions