...filling with water. We have removed the front cover of the washer and removed the tube from the air dome and blew into the tube and the washer stopped filling and started agitating, so we don't think ...
...plate Remove the agitator dome by pressing on the 4 snap ins on the bottom of the dome and wash-plate. Remove the bolts from the wash-plate and lift it out. Here is a exploded diagram of the
Maytag Performa Overfillng Removed clear hose from dome while machine was filling,blew into hose very gently, water shut off and washer agitated. When I reconnect hose to dome and start cycle water ...
...dome line. Remove the control console screws to access the water level switch. Remove the small plastic hose from the water level switch and blow through it to dislodge the blockage. If it is ...
remove the wash dome Hello James; My name is Peter. I am a retired field service appliance technician. On the bottom of the dome are 4 clips that you must push in on. Be careful not to damage the seal
dome does not pry off or pop off. Hello, Your washer is close to the one in the video but as you know not exact..that agitator coupler shown in the video bolts down under the agaitator. To remove your
...dome remove the cabinet shell as follows: I will skip console removal as is seems you already know how... With the console lifted; 1. You will find a lid switch connector (white in color). Unplug the ...
dome/air pressure hose. This gives a false reading to the water level switch. Usually a simple repair, you remove the front panel by slipping a putty knife into the top joint of the front panel, until
dome hose. Remove cabinet and examine. UNPLUG To remove cabinet. Remove 2 screws in front of console one on each side.Lift console forward than up and flip back. Be careful not to knock it off hinges.
1,725 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,373 Questions
429 Questions
