Whirlpool Ultimate Care II LSQ9549L Top Load Washer "separate agitator" Questions

agitator will not separate now that you have it out of the machine, if the agitator is stuck, you may be able to get it loose by rocking it back and forth while pulling up on the base or bottom of the

...separate auger from agitator. whirlpool ultimate care II Whirlpool ultimate care II washing machine. I am trying to replace the dogs and can not separate the auger from the agitator. Any suggestions. ...

agitator out. It should separate. If it does not separate,stand on the lower half and forcefully pull up on the upper half.Remove the agitator dogs and spline gear from the upper agitator. Replace the

...separate the top part of the agitator from the bottom piece so I can clean it better. I can't find any screw holding the two pieces together. Is there some way of separating the two parts? Thanks for ...

...center of the agitator and lift the agitator out of the washer. Separate the upper and lower half of the agitator and install the new gears. Reinstall everything in reverse. Hope this is of some

...separate agitator. Have tried extreme force to separate the top from bottom. There must be some other way on this unit. Whirlpool Ultimate Care II. Have removed agitator but the two halves won't come ...

...see that the tower and cup are separate from the base but can't get the tower off. Maytag Model MAV6457AWW Pull off the top cup, then use a socket wrench to remove the bolt to separate the

...separate the 2 agitator parts on a Whirlpool LSQ9549L? How do I separate the 2 agitator parts on a Whirlpool Ultimate Care II LSQ9549L Top Load Washer? I tried standing on the bottom part flange and ...

...separate lower from upper agitator once removed from the washer. The washer is a Whirlpool #LSN1000LW0. Had same problem with my washer. Check to see if there are little plastic tags holding ...