...Imperial-2speed/9cycle Modle#LA7800XSW1 Water will not drain out properly. hi.. Remove bottom panel. ( 2 or 3 screws on bottom.) Remove what looks like a big white screw, this is probably clogged up. ...
imperial 70. Problem more likely is in the 'wig-wag' unit that engages and disengages the spin clutch and the agitator drive hi thanks for the question this problem can be a lid switch also if the lid
...imperial 9 cycle washing machine is leaking from what appears to be the pump area, no leak from the pump or hoses, do you know how to remove cabinet remove the 2 screws holding the console in, they ...
...imperial series 2 ultimate care washer Hello, I have a problem with this washer. It is currently leaking water from the front on the left when in use. I can see where the water is comng out of the ...
...Imperial Series heavy duty super capacity plus washing machine and it has recently stopped spinning. This means that when I was it does not spin to mix the suds, nor does it spin to help dry the ...
Question about Whirlpool Washing Machines
...2 Imperial Series washer that doesnt spin out very well. It will sometimes spin out but leaves the clothes very damp. Sometimes the washer will try to spin itself out but wont until i reach in and ...
...Imperial ultimate ii washer you have to remove 2 screws and flip the console back, then pop 2 gold clips and unplug the switch harness. The switch is under the cabinet top. Easy for those who have ...
Question about Whirlpool Washing Machines
imperial series 2 ultimate care washer my washer started out not spinning. now it fills up agitates the load, then stops on the rinse cycle.then it will not drain or do anything.please help. I had the
...Imperial Series Quiet Wash 2 When filling on rinse cycle machine will drain water continuously without ever filling. What is causing it to drain? Machine is about six years old. It works fine ...
Question about Whirlpool Washing Machines
...imperial series will agitate but will not do spin cycle If that is the old belt driven modle I would check the lid switch. If it is bad then no power will get to the wig-wag and the transmission will ...
2,460 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
1,413 Questions
1,373 Questions
429 Questions