Whirlpool GHW9400 Front Load Washer "inlet valve" Questions

Ad

Question about Whirlpool Washing Machines

1 Answer

inlet valve non operational on whirlpool awm 258 nordic whirlpool washing machine awm-258 nordic cold water inlet does not work anymore... Please check on the voltage on the inlet valve , check on the

Ad

Question about Whirlpool Washing Machines

1 Answer

inlet valve and the only way to solve it is by replacing the water inlet valve assembly. It is an easy "do-it-yourself" fix that only requires a minimum effort. Water Inlet Valve Replacement Procedure

Ad

Question about Washing Machines

1 Answer

Inlet Valve Fault. Repair or Check - Unplug the washer from power. Reconnect any non secure wires on the water inlet valve. Replace the wire harness if it is found to be damaged. If the wiring is okay

Question about Maytag Washing Machines

1 Answer

...inlet valve. The inlet valve is tested reading impedance, if it is broken, then it usually read infinity (circuit open). Reaing is done disconnecting valve and pointing multimeter probes at valve ...

Question about Samsung Washing Machines

1 Answer

...inlet valve is not stopping running water? The washer inlet valve is not closing at all cycles, however when I shut off the power from the mains and restart the washing machine it stops water then ...

...inlet valve clogged by impure water. The Inlet Water Valve is normal ? The water pressure is very low. ( below 0.5 kgf/ ) Inlet valve is blocked by safety device for leakage sensing.(In case of Inlet ...

Question about Maytag Washing Machines

1 Answer

...inlet valve and the pressure/water level switch assembly. Inspect the inlet hose coming to the washer for any blockages. If the hose is not clogged then check the water inlet valve for any clogs, if ...

Question about Whirlpool Washing Machines

1 Answer

...inlet valve and the pressure/water level switch assembly. Inspect the inlet hose coming to the washer for any blockages. If the hose is not clogged then check the water inlet valve for any clogs, if ...

Question about Washing Machines

1 Answer

...inlet valve humming? Remove the inlet valve hoses and see if there is any sand plugging the screen inside the inlet valve. If the inlet valve does not hum when the water is to be filling, you will ...

Question about Maytag Washing Machines

1 Answer

...inlet valve is faulty, first check to make sure the water faucets are fully turned on and properly connected to the hot and cold inlets of the valves. Then check the screens in the valves; if they're ...

Not finding what you are looking for?
Whirlpool GHW9400 Front Load Washer Logo

141 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...