Samsung UN46D6000SFXZA 46in Led Hdtv 1080p 120hz "pluged power" Questions

dav-s300 not works unplag protect but not working proably fulty power is it direct pluged in wall thats worse way need power strip they dont sell parts for this also

...power, system is 4 years old. un pluged system and moved to another plug but still no power You can open up the unit and check the fuses. Replace them if they are blown. If there not blown then there ...

...pluged my rca rt2906 into a 220v plug and it blew and started smoking are there any fixes for it? Hello The power supply section of your HTS has been destroyed permanently. You have to replace the ...

...power supply .the only one i have is a 12v.when pluged in i get a feedback noise. whats the problem? Hi there. If it is a low frequency hum(mains hum) you hear, the power supply is the wrong type. A ...

...pluged up i replaced power supply nothing It sounds like an internal electronic failure. If you are lucky it may still have some warranty. Check with the place you purchased it, they may be able to ...

...pluged it in to the back, but I am not sure if the phantom power is on or off when the button is down?? When the button is down phantom power is on (for the first four inputs only... A to D... which ...

...pluged them all back in properly i noticed that the 'power plug' (which has small teeth on it + has to go in a special way) had one of the teeth bent slightly, do u think this cud b wots causing the ...

pluged up It has no lights on when plugged up it wont power on This sounds like an internal electronic failure. If you are lucky it may still have some warranty. Check with the place you purchased it,

the unit sparks at the back of the amplifier and smelled burn, then there's no more power. is it new or did you by it recently go to the shop you baught it from or call sony because that must of been ...

power the speakers y pluging them in it could be if the speakers are powered then the adapters might be getting old and tired if all fails try moving the speakers right next to the reciever and see if