Whirlpool SF367 Gas Kitchen Range "display oven lock unlock" Questions

...oven doors lock. ?Lock? remains lit in the display. To unlock the control panel and both oven doors: Press and hold upper oven Cancel and Cook & Hold for 3 seconds. ?Off? disappears from the display ...

...display on the electronic oven controls, where the clock and timer normally appear. If the display reads "CLN" while the "Door Locked" light is on, the Kenmore range is in self-clean mode. When the ...

...display says it is locked. Oven will come on and operate but door cannot be unlocked. It just beeps. Wonder if there is come kind of reset or do I need Sears to deal with this. Any ideas appreciated. ...

...display not working Stove and oven work fine but stovetop is dark because LED readout is not working. Did somebody use the control lock by accident. Here is how to disable it. Hopefully it will work: ...

Clear to clear the display; apply pressure to the upper-right corner of the oven door, and the door will unlock. Is the display showing E"#"-F"#," for example, E1-F2? You will need to schedule service

...oven door remains unlocked. The message display states: door locked. How do I unlock the oven door? Hi, Seems like you found out the hard way what I wrote about in this tip... Check it out it also ...

...display flashes "Door locked" and oven is completely inoperable. The locking latch is MOVING back and forth from the lock to unlock position (display still says "door locked"). I have tried to push ...

...oven after self clean mode, blank display ... ? 9:38 https://www.youtube.com/watch?v=UylZKwzAPow Feb 22, 2014 - Uploaded by Random Repair Repair - Dead oven after self clean mode, blank display, ...

Oven/Door-Will-Not-Open-After-S... If the door will not unlock at the end of the clean cycle then you may have a problem with the oven temperature sensor. Most electronic control ovens will display ..

...oven burners and control panel so they cannot be activated. To lock/unlock the controls: Turn all surface burners off. Touch and hold the Gas/Control Lockout pad for 3 seconds until the display shows ...