Frigidaire Side by Side 26.0 Cubic Foot Total Capacity Refrigerator "ptc" Questions

...on the OLD relay. 1, 2 4 4 ect... make a simple wite color to terminal number sketch. PULL off PTC relay WITH terminals by pulling HORIZONTALLY (Usually to the left / 9 O'clock position) NOTE

my fidge is a kenmore medel 25357685790 my starter ptc looks to be burnt so i decided to replace it but it includes three pieces the capacitor, starter ptc and overload. the new parts only have a ...

...off. check thermostat could it be the module? Hi, I had the same problem. Mine turned out to be the PTC starter. Checked the compressor coil resistance and it ws fine. Replaced the PTC starter with ...

...rear panel and the sound is coming from the compressor area. Could this be the Run Capacitor or the PTC starter? it looks like you have a bad compressor. try replacing the ptc starter and the run ...

...wall of freezer will have snow/ice/frost on it)if this is the problem,otherwise the ptc overload relay on the compressor is bad and the compressor cant run correctly,if it just keeps ...

Kenmore refrigerator PTC relay for compressor I help to connect the replacement PTC relay for the compressor. There are blade terminals numbered 1 to 4 on the front of the relay. What color wires go ...

...is not cooling. Compressor comes on than off after 20-30 seconds you need to replace the ptc overload relay replaced on the compressor as this component is getting weak and is cutting ...

my compessor is not working on my neff K3965XO any ideas replace the ptc overload on the compressor,it unplugs off the compressor and plug in a replacement ptc overload of the same type

Our Side by side refrigerator is running but is not cold replace the ptc overload relay on the compressor in the back unplug the old ptc get a new one and plug in and it will cool again

refrigrator stop cooling if the whole unit has stopped cooling then its the ptc overload relkay on the compressor,simply replace it by unplugging it off the compressor and putting on an exact ...