Sony SY-ICF-C414 Clock Radio "cancel times" Questions

...on the final Sunday of March. • Standard time begins at: 2:00 AM on the final Sunday of October To cancel the Automatic DST/ Summer Time adjustment and to set DST display manually The Automatic ...

...TWO SEPEATE ALARM TIMES YOU COULD SET PUT ON CANCEL OR JUST TIME. while on key push cancel (alarm dots blink) then push wake 1 or wake 2 (which ever one you pushed the light for it should

...display) change to either the music or bell symbol; depending on how you'd like to be awaken. To cancel the alarm, simply hit the "Cancel" button once, then press the "Wake Mode" button until the ...

...it's hardwired into the old DST schedule and there's no way to reprogram it. You'll just have to reset it manually four times a year, unless there's a switch to cancel the automatic DST changes. Bill ...

...it off. I feel stupid for not being able to figure this out. Disable the alarm permanently 1. Press CANCEL button. 2. The WAKE indicator will be flashing. 3. Press WAKE MODE button within 3 sec- onds ...

...the alarm? I can turn it off when it stops but then it starts again the next day. Press the "wake cancel" button and then press the number of the alarm that was set (either button 1 or 2). The ...

CANCEL once or SET 3 times to exit. Press SET twice ... it will display wake 2 time and just press the FF or RR to set the time. Press either CANCEL once or SET 2 times to exit. Enjoy your clock! From

>>| FWD to set the time. AM or PM icon will show besides the time. I have the same problem, I can't cancel out the alarms. blink, blink and more blinking, then when I finally get them off the screen..

...on with the radio and not the alarm. There are three buttons under the heading "Dual Wake", WK1, Cancel, WK2. The WK buttons refer to the two wake time settings you can have. Press Cancel and then ...

cannot reset dst to correct time. setting time is driving me crazy Press and hold DST button for more than 3 seconds while the clock is displayed. A beep sounds and "AUT->OFF" appears on the ...