Vtech 5.8GHz Cordless Phone with Digital Answering System "play voice memo" Questions

...play message you should hear it and at the end it should auto matically rewind and be set. good luck please rate this solution. thanks RECORDING LIMITATION : You have a limit of 10 voice memos ...

...voice guidance in the following order: ? Play back all messages ? Play back new messages ? Record your message ? Erase all messages ? Record your greeting message Note: LIf you do not press any dial ...

voice" to that comes with the machine !! How can I record my own message? Thanks, Angelina. Press Menu. Then the unit will say "record outgoing message" Press the REC/Memo button and the unit will say

...play incoming messages, press zero two. For help, press one zero." 4) You may continue to listen to the voice prompts, or you may select a command from the following chart: *For Memo Record and ...

voice menu is as follows: ? Press "#1" to play mailbox 1. ? Press "#2" to play mailbox 2. ? Press "#3" to play mailbox 3. ? Press "#5" to stop. ? Press "#4" to repeat the message. ? Press "#6" to skip

...play incoming message, press zero two. For help, press one zero." 4) You may continue to listen to the voice prompts, or you may select a command from the following chart: Command Function Command ...

...voice Mail? I thought it should be 1. call the phone 2. press * 3. enter PIN But that is not working. This may be a little late, you are probably home already, but here it is anyhow: Remote Operation ...

...play incoming message, press zero two. For help, press one zero." 4) You may continue to listen to the voice prompts, or you may select a command from the following chart: Command Function 0 then 1 ...

...memo button on the base and follow the voice instructions. 12 Answering System Operation Recording the Outgoing Announcement For best results when recording, you should be about nine inches from the ...

...play incoming message, press zero two. For help, press one zero." 4) You may continue to listen to the voice prompts, or you may select a command from the following chart: Command Function 0 then 1 ...