...dial tone connected vtech CS6229-3 but get no dial tone - waited till batteries were fully charged, still no dial tone - reconnected the old phone & now no dial tone there either (worked fine ...
...dial out on pulse on one line, works on second line try changing phone to tone dialing . one phone line has been setup for Decadic dialing and the other line may be setup for tone dialing. If tone ...
Dial Tone - Number Dialed does not go through We have the base with two additional handsets. We pick up the handset, have a dial tone and dial the number. It will not go through. Doesn't seem to ...
...dial usually goes like below, can't hurt to try on any model. TONE/PULSE DIALING This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing. The phone is pre-set for ...
...phones: Just follow these simple steps: 1. press menu button standby (off mode) 2. press round arrow control DOWN repeatedly until "Set tel line" appears. 3. press "OK" to select "set tel line. 4. ...
dial tone? And have you tried another phone? If there is a dial tone make sure the phone is set for tone dialing. There will either be a switch on the side of phone for pulse or tone, set for tone. or
...dial out using pulse. I think this phone might not support pulse since on the menu option it only has tone on or off. What can I do? Thanks The Vetech phone will only support tone dialing. It does ...
Dial Tone but won't call out. We have a dial tone, but when we start to dial a number, nothing happens. The dial tone continues as if the phone doesn't send the numbers through. We have a dial tone ...
dial tone on speaker-phone but no dial tone on line 1 Either button mapping or no dial tone at the system cabinet. If your desplay sas CO1 and you have no dial tone, go to the sytsem cabinet ans swap ...
201 questions posted
Usually answered in minutes!
607 Questions
454 Questions
320 Questions
275 Questions
81 Questions