setting the time Model WT 3143 how do you set the time please? It sets itself. You just tell it the Time Zone. http://www.klockit.com/PDFs/lacrossemanuals/AnalogWallClocks.pdf
...set the correct time repeatedly ,but it only works for a day and then loses time again. I have replaced the batteries but to no avail. Is the clock now a paper weight or is there a correction I have ...
Question about La Crosse Home
...set to Pacific Daylight Savings. Keeps Resetting back to PST Every day when I have time, I have to change my La CrosseWT-3161 that I bought at Cost Co with instructions on back of box, ahead an hour ...
...time zone button. I tried that, but it does not work. There are pins in the top left corner of the control panel on the back of the clock. I tried shorting these. There is a tab about three inches ...
...for WWVB each hour until a signal is received. If the time is manually set the clock will continue to periodically search for a signal and automatically reset the hands when the signal is
set the time manually by pressing and holding Set. First set the time display mode (12/24), then press and release Set again. Then set the hours, followed by Set and then the minutes. Continue through
Question about La Crosse Home
time (via the small grey wheel near the BATTery, but set it about 7 to 12 minutes 'early' or before the actual correct time, (preferably at about 10 min. before an Hour). -then remove the one " double
...set to daylight time. By the way, there was no manual with the clock so I have no trouble shooting guide. Thanks, Carroll Try this link and follow the instructions. ...
...set to the time zone selected last. If no time zone is selected the clock will default to Pacific Time. Another time zone can be selected during or after the clock has set itself. Your clock can only ...
217 questions posted
Usually answered in minutes!
350 Questions
260 Questions
250 Questions
168 Questions
217 Questions