3Com NBX 3102 IP Phone "console" Questions

3com 2102 IP phone We cannot program buttons on the attendant console. Button says default on it an when I try and enter the new data I get "Unable to save changes. Invalid data has been entered or ...

...normally again. The preferred method (since you can do it through netset) is to connect to the console port with a DB9 straight through serial cable and open hyperterm or putty and connect to it ...

...you will have to get a serial cable (null modem cable) DB9 male to DB9 female and connect to the console 1 of the phone system. You will need a terminal emulator program and connect at 9600, 8, ...

kx-tda100 maintenance console i have the panasonic kx-tda100 ip-pbx...in fact was using it for a while in evaluation to get to be fluent with it before i finally install it in my dad's hotel. Then my ...

I am trying to configure a Soundpoint 330 IP Phone, everytime i try and make a change in on the web console it reverts to a default! I think the phone is pointing to another config file, is there any ...

...<Enter>. The following example displays IP settings assigned by bootp or dhcp using the CLI. Console#show ip interface IP address and netmask: 10.1.0.1 255.255.252.0 on VLAN 1, and address

...The phone that's mated to the DSS has a PROGRAM button. Press it, then press the button on the DSS console. Dial "1" plus the extenson number and STORE. ...

change display name You have to go into teh Administration console and change teh name there. The change will be reflected on the phones display after you change it.

Caller ID not displayed I cannot see my caller IDs on the console of my IP phone check the settings on the PBX , Caller ID has to be set -up correctly on the PBX , ie T1 needs to be configured to pass

...IP phone extension rings but does not go to voice mail it has been set up via the administrator console You need to verify your Call rerouting, you will also need to clear any call forwarding