Question about Samsung Vacuums
...same model slows down to dock giving it time to line up. There may be a communication issue with it. See if there is way to reset it. If you have the owners manual see if there's a way to
Question about iRobot Vacuums
...of sandpaper to lightly scuff/clean the battery contacts. Once you put it back together, try the reset function mentioned
500 series i robot is there a way to reset ? Hold the Spot and Dock/Demo buttons down for at least 10 seconds. The unit should now be reset.
...dock only a foot or so and then spins around in a circle goes forward a few inches and the spins around again appearing to be lost. unit is 16 months old. Have cleaned all brushs, wheels, filter and ...
...I didn't remove the battery. When I plugged it in to recharge it, it did recharge after several resets but it would not dock itself once it had finished. It kept trying but I had to turn it off ...
Reset the Roomba: hold down "spot" and "dock/demo" for fifteen seconds, then release and listen for the tune. Then charge the Roomba overnight. The next time you run it, the unit should run longer. If
...each time I try to start in either mode "spot" or "clean". I did clean it does not help. appreciate any help! Reset your robot by holding down ?Spot? and ?Dock? together for 10 seconds. this might ...
...diagnose it with self test and it looks like the clif sensors are all bad. this video shows the problems: http://www.youtube.com/watch?v=zyPw7vnXljU have you tried reset, press spot and dock ...
...reset your Roomba: hold down "spot" and "dock/demo" for about fifteen seconds. Release them and wait for the tune. Recharge the Roomba and then try to run it. The virtual walls ought to respond at ...
...reset the charging circuit. 1) Charge it until the green light comes on. 2) Unplug and pull battery out. 3) hold down the power on button 15-30 seconds. 4.) Put the battery back in, plug in the ...
46 questions posted
Usually answered in minutes!
191 Questions
140 Questions
90 Questions
79 Questions
30 Questions