Nortel Norstar Audio Conferencing Unit (NTAB4213) "feature button phone" Questions

...Feature **CONFIG) . You will need to program from a M7310 phone because you need the 3 soft keys under the display which the M7208 does not have. The top 4 keys on the phone are used for programming ...

...button How do I put someone on "hold" to be able to conference with 3 people? Make or receive first call. Press Feature 2 to place call on hold. Make or receive second call. Press Feature (star) 3 to ...

Feature" button and 983, then enter the password 120000 (this one is used if you have 2 digit extensions 1020000 is used if you have 3 digit extensions) . Next in the display you will see mbox-AA-othr

...button, dial the next number, dial the feature code (get from your vendor), repeat until you have all parties as part of the call. The 5310 IP conference unit works much easier than this phone. A ...

...feature is enabled. talk to your IT department about it and ask for the codes. You need to define automatic call diversion. Use the below procedure to define the call number, time slot and weekdays, ...

...Feature **266344 Password:266344 You will have 4 programming buttons on your phone, normally the 2 top left and 2 top right of the 2 vertical rows. top left = move up one level lower left = back top ...

...Feature button to the left of the Password." More information is available on page 48 of this pdf: http://www.kumc.edu/Documents/Information%20Resources/4610VOIPTelephoneUsersGuide.pdf Entering ...

Button module, the first 16 call appearance/feature buttons displayed on the Station screen are administered on the 1416 telephone. The remaining eight call appearance/feature buttons displayed on the

feature buttons on an Avaya 4621 IP Phone I have the key clicks turned off on the dialing pad, but need to turn of the key clicks on the line feature buttons dang menu's so hard to find what you need.