Technics SL-BD22 Turntable "belt drive" Questions

Is there a drive belt guide that holds the belt in place on the drive gears? The belt is slipping and is pinching between the 2 drive gears You need new belt.

...drive belt I followed the instructions to set up this turntable. However, the drive belt was preinstalled around the inner bottom ring of the turntable platter. When I got ready to pull the rubber ...

drive belt is fitted under the platter. When assembling the player, please handle the drive belt with care. ? Remove all packing materials attached to the tone arm, except that on the stylus, and then

belt-drive turntable: The view is through the rectangular hole in the platter you see with the turntable mat removed. This picture is from the setup section for a new turntable, so the ribbon tape won

...belt-drive and direct-drive systems; the names are based upon the type of motor system found in each. In a belt drive turntable the motor is located under and to the side of the platter and is ...

belt drive back where it is supposed to go? WASH YOUR HANDS FIRST! Any oils on the drive belt may cause slippage. This is from the manual: A) Remove the record mat from the turntable platter (Fig. 10a

...drive belt off. Where do I route the drive belt to get it back on? The Operating and Install Guides are here... http://www.retrevo.com/support/Sony-PS-LX250H-Turntables-manual/id/752ag608/t/2/ ...

drive belt is fitted under the platter. When assembling the player, please handle the drive belt with care. ? Remove all packing materials attached to the tone arm, except that on the stylus, and then

...Belt Drive Turntable Vinyl Engine How to set it up after you put the belt on. How to set up Turntable cartridge alignment overhang VTA VTF vibration... Another look on how to change a belt on a ...

...Drive Belt Can anyone help with the proper routing of the turntable drive belt? For some stupid reason the belt fell of my brand new Turntable. Thx. Norman Syl./Portland, OR Hi Norman Normally the ...