Sharp AR-5320 Black and White Copier "atc sensor" Questions

...ATC sensor failure. Error code 14. I replaced developer and did ATC sensor setup. Still having issue. Yellow ATC Sensor Failure,Code12 Magenta ATC Sensor Failure,Code13 Cyan ATC Sensor Failure,Code14 ...

...ATC sensor failure - code 009-380", i changed developer and xerox phaser 7760 saying "black ATC sensor failure - code 009-380", i changed developer and xerox phaser 776 I can not start service mode ...

ATC Sensor (K) detects an insufficient amount of developer material Check that Toner/Developer is present. Check the ATC Sensor (K) for contamination. Ensure that the sensor is seated correctly. It is

WorkCentre 7245. What does error code 009-380 indicate? i change toner That error indicates the yellow atc sensor detects a low toner concentration. Try clean atc sensor and reset value to 0.

...ATC sensor failure That sensor is located in the developer housing. You can either replace the sensor, or replace the developer housing, which comes with the sensor. Either way, you will need to go ...

...atc sensor failure The Black ATC sensor detects an insufficient amount of developer. Remove fuser and visualy check black developer housing. Does developer even on magnetic roll? If this failure ...

atc sensor failure Xerox phaser 7760 laser printer has an error Hi mgordonO: The problem is with the toner cartridge or the developer. One or both may be empty. Fel i cyan ATC Sensor.Ett fel upptä

ATC sensor (130K63000) (difficult to reach..recommended to be done by technician) 2) Defective Developer (802k60194) (also difficult) You also need Developer Charge Powder (604K22550) 3) Defective ATC

...ATC sensor perforated tag. Do NOT remove the ATC sensor label from the developer housing.Peel off the protective backing, and adhere the label to the appropriate or corresponding Imaging Unit Plate. ...