...2950 comes on keyed up and stays keyed untill you turn it off. I have replaced the auto amp, all voltage regulators and the black diode with yellow strip below mic plug with no change. I need to fix ...
Question about Radio Communications
...2950 work at lower watts 'but when i turn the watts up the meter drops and the radio shuts down? I can turn it off and back on and it works again till i try to turn the rf power up ' then it shuts ...
2950 WORKS FOR ABOUT 3 MIN THEN STOPS TURN OFF FOR TEN MIN WORKS AGAIN Hello, Just offhand I'd say you have a bad solder joint on the main circuit board. Without more info, I can not tell you where to
Question about Ranger Radio Communications
2950 transmits on 1 channel higher when first turned on what causes this? the radio needs to be aligned. The VCO may be unlocked. What ever is not in alignment is off ever so slightly so that when you
Question about Radio Communications
...and channals are skipping why and can it be fixed? skipping all by itself or skipping when dial is turned only ? if it skips only when dial is turned , switch contacts inside can be cleaned using ...
2950 RCI WONT TURN ON ONLY A BACKGROUND LIGHT You either have a bad LCD display OR the connection for the LCD display is loose/off. Its impossible to tell what channel you are on with a 2950 without ...
46 questions posted
Usually answered in minutes!
32 Questions
10 Questions
9 Questions
6 Questions