...transmit". Radio, antennas, and wiring are all less than two years old. Should I try a new mike? Firts you have to check for carrier.For this you need an swr meter.2) Check continuity between the ...
radio actually Transmit? If the radio says it is transmitting but no power is coming out then you may have damaged final output transistors. Please give us more information about the type of radio you
radio apart and is clean. Lights up. When transmit needles drops. No transmit. Think finals for sure. Thank you. Not familiar with the 35......If it is a ssb radio it will have a pre driver and a pair
Question about Cobra Radio Communications
...the sun to get to transmit and still will not. PLEASE HELP!!!! your final could be blown,thus no transmit . if you change it make sure you change the driver also and retune that portion of the
Question about Galaxy Radios Radio Communications
when i tune the radio to fm i cant transmit it when i tune the radio to fm i cant transmit it keys up but no modulation the FM final transistor is bad.
Question about ICOM Informatique Radio Communications
...ok,checked the final transistors seem ok but the radio cant push any power out upon what frequency are you trying to transmit? Perhaps the radio is blocked from trying to TX on said
radio will key up and modulate but only for a short time, as it fades away. what do you think the problem is. i have been thinking a final transistor or the c112 capasitor It sound to me like it could
i have a 6300 f25 does not transmit will it transmit to a radio next to it. if so your RF final transistors are bad. other things could be a bad mic. with a broken wire.. ie..
Question about Radio Communications
...audio ic good radio does not receive or transmit. could it be the keying transistor? if so what number in the radio is it radio does not receive or transmit. could it be the keying transistor could ...
Galaxy DX 33hml transmits loud and clear the first few times you transmit then modulation slowly deteriorates into noise and static. Does the same in PA mode.Let it sit a while and try again and it ...
46 questions posted
Usually answered in minutes!
32 Questions
10 Questions
9 Questions
6 Questions