...the battery is shot. As you indicated the charge light shows good but the minute you draw or try to draw current ( power ) by activating the radio the battery does not have enough life left in
...the battery. I think what ever drained your battery has little or nothing to do with your b radio. ohms is resistance. it is not a measurement of current. this does not tell our it is drawing ...
Question about Magnum Radio Communications
Hello: What is the maximum current draw (amperage) of this transceiver in the transmit mode using a 13.8VDC power supply? Thanks. 6 amp
weak xmit - draws excessive current Hi and welcome to FixYa, On your posted description of the problem, initial check would be a possible leak of either the drive transistors(TR44 to TR46) or the ...
Question about Radio Communications
...radio as most will support up to 500 watt amps. I'm not sure what "truck posts" are, as I don't drive a semi, but do know quite a bit about CB Radios, etc. + Are these truck posts 12-Volt? If not, ...
Question about Midland Radio Communications
...this area. It may be a very difficult to find. First you need a service manual. www.midlandradio.com/Resource_/Product/787/.../75-785.pdf Above is a USER
Question about Connex Radio Communications
...radio with the volume all the way up it sounds like it has no power or volume.very low sound comes out your power switch it faulty as there is a drop in voltage does the meters dim down?? then the ...
...radio it is drawing some current. When the power supply is turned off or on with the on/off switch on the LXLE turned off there is still a spike of current going through the radio. Not to worry, it ...
...current to your radio. Q4 the 2n3055 pass transistor is most likely shorted. I suggest replacing it with a more capable transistor that can handle more current. A 2N3772 is a good choice. Your final ...
Question about Connex Radio Communications
...the same current draw, etc. If you're looking for higher output, you will need to change out more than just the finals, in order to support the extra current draw from the higher output
46 questions posted
Usually answered in minutes!
32 Questions
10 Questions
9 Questions
6 Questions