...cold solder joint on the circuit board and this needs to be re-soldered, or it could be the actual component. These can be hard to locate, so take your time and use just a little of the coolant at a ...
Question about Ranger Radio Communications
...cold solder joint on the circuit board just to name a few.my suggestion is to find a good local cb shop,if no local shop find one along the interstate hwy most of the time they are located around or ...
...cold solder joint. Adding a small amount of solder repairs the joint to "After". The first thing to do is determine if there is a loose connection or "cold solder" joint as shown above. Only attempt ...
...meters Take the cover off, flip it over solder side up, check all solder joints for cracks, cold solder joints, check the safety diode where it comes in the radio, before I go further, can
joint on one of the legs or it could be that its time for a new crystal..they don't like the cold weather at all...but it is fixable so don't worry hello i have a galaxy pluto and on usb it sound like
...cold solder joint at crystal. I suggest if you are comfortable with solder iron press down on crystal and remelt solder. This crystal has a wire strap-over soldered from L24 to it after locating it ...
...circuit board side, and with the eraser end of a pencil, touch around on the board trying to locate cold solder joints, have to look real closely and re-solder them....Thanks for choosing ...
46 questions posted
Usually answered in minutes!
32 Questions
10 Questions
9 Questions
6 Questions