Ranger Communications RCI-6900F-25 CB Radio "3" Questions

...was a little different. Anything new it is simpler. Stock Mic 1- Shield (Ground) 2- Yellow (Audio) 3- Red (Transmit) 4- White (Receive) Astatic - 4 wire 1- Shield 2- White 3- Red 4- Black static - 6 ...

mic wireing I have a president washington base and would like to know how to wire a 4 pin turner +3 power mic to it. and or a d-104 astatic {lollipop} For a Turner +3 it is 1/shield 2/white 3/black ...

I have a Cobra 21- 23 channel CB and the wires pulled out of the plug. The mike wire has red,yellow black,blue,whiteand a ground. My plug has only four prongs to solder to. What four colors do I use? ...

maxon wire fuses need fuses size / maxon mcb-30 cb radion mobile If a inline fuse in a holder the old one will aside from length have the amperage printed on it---very few mobile radios use larger ...

...radio 2 come away in plug s9 for what mic DeltaForce: Pin 1 : Microphone Audio Pin 2 : Receive Pin 3 : Transmit Pin 4 : Down (Up w/ 22K Ohm Resistor) Pin 5 : Ground Pin 6 : +13.8 VDC Magnum S9

...core silver solder radio shack sells it.Mic Wiring Stock 1-Shield  (ground) 2-Yellow (audio) 3-Red     (transmit) 4-White  (receive) Astatic 1-Shield & Blue

explaihow to wire a turner +3 mic to a president washington base can any one tell me how to wire a turner +3 mic to a president washington base station Here you go 1/shield 2/white 3/black 4/red . ...

...following is the correct wiring. Mic Wiring Info Stock Mic Wiring 1. Ground Shield 2. Audio Yellow 3. Transmit Red 4. Receive Black 5. CH. Up White 6. CH. Down Blue Turner 4-Wire MIC. Wiring 1. ...

...inside the radio at the mic jack, with the nub down. Starting from the left is pin 1, pin 2, pin 3, pin 4, and pin 5. here is the colors that should be attached to each. 1 is white. 2 is sheild. 3 ...

...for different mics that will work with your radio. If a wire is not listed then you cut it off. It's best to keep the wires as short as possible no longer than a half inch is suggested. Normally ...