Technics SL-1200 Turntable "set" Questions

...wrong with the turntable. It happened with 5 or 6 albums I tried. HELLO Make sure you have the deck set up correctly! Check the headshell - is the cartridge out of alignment or is the stylus worn? ...

I have a Kenwood KD12R turntable. How do I set the arm and needle. I have a weight with an adjustable dial at the end of the arm and a separate anti skating dial on the base of the turntable? Regards

...one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some ...

Well on my technics MK2 1210's, the little anti sketch settings and all the others probably arent set to what they are supposed to be, because my needle arm keeps jumping :P could someone tell me what

...(rotations per minute) If you are playing a record that takes up the entire turntable you need to set it on 33rpm. For the records that only take up half of the turntable you want to set it on

Not really a problem. I just want to know the correct setting of the power "slide". It looks like 3 different settings could be available. My question is: Does the smooth part of the slide ...

... 2. install new software if needed, 3. connect ION Audio USB. make sure its ON (if it has a switch) Setup Procedure 1. Start then Control Panel. 2. double-click Hardware and Sound. 3. double-click ...

...play on my t.92 play perfectly fine. But some records get constant jitter and skips. I've tried to set the anti skate to compensate but it seems like it doesn't even work at all no matter what i set ...

I changed my settings on a technics SL -D2 as my mums old records did not play as were too dusty which I realised too late when arm and needle slid over record so I unfortunately changed settings ? Wh