...phono output lead causing the signal to crack up and conk out at times-sometimes by holding the lead in a certain way I can still play, but this has to be fixed properly-how can I change this lead? I ...
no sound out of deck hi there have no sound coming out of one deck 1210 mk2, have had new phono leads put on and is now coming through one speaker any sugesstions If you've already replaced the RCA ...
Single sided sound from my RCA/Phono leads Help!I have a problem with (one sided) sound coming through my phono leads.I replaced the suspect leads with a new set and was left with the same problem?It ...
Question about Technics Audio Players & Recorders
...lead on to deck or pull back the sheath plastic covering the fitting and reconnect the cables(the insulated wire goes to the pin an the uninsulated goes to outside ring)gd luck try cleaning the phono ...
Question about Technics Audio Players & Recorders
phono lead on the Technics is quite straight forward to replace. It does involve removing the deck base and arm base cover and then a bit of soldering but it's pretty easy. Look here for a new cord :-
very low sound after new needle installed I installed a new needle on the turntable, as there was none when I bought this at a flea market. Radio works/sounds great. Switching to phono, it plays and I
Distorted sound. The sound is very distorted..I have cleaned(head shells) even changed the needles.They are set at proper weight per MFG standards.BTW the sound is only distorted whene it plays ...
...Phono plugs when the playback is going on, the sound can get blurring, fuzzy, now it can get worse or better when I touch the rca cables. If its a problem with the RCAs - then what is the solution, ...
Question about Technics Audio Players & Recorders
how do i replace the phono leads on my technics 1210? alternativly if you dont reccomend me doing it can you reccomend anywere in uk that pick up, fix and deliver back? please help im on mono decks at
Question about Technics Audio Players & Recorders
...phono lead with a new one,what else could it be? one sided signal (right side only) already replaced lead,so that should rule out faulty cable...any other suggestions would be appreciated. Have you ...
116 questions posted
Usually answered in minutes!
325 Questions
254 Questions
185 Questions
116 Questions
97 Questions