Technics SL-1200 Turntable "q2 q3" Questions

...is a problem inside your turntable (on the main board) check the components  TRANSISTOR    Q2, Q3,  ZENER DIODE   D3.. CHANGE IT IF POSSIBLE.. the pitch is on it's way

...Q2, Q3 and zener diode D3. OR 2, The drive I.C (I.C101 / AN6675) has failed, this can be natural failure but also can happen if the deck is turned on and started with the platter removed. Free ...

...Q3 AND Q2  AND ALSO THE ZENER DIODE D3...PLS. DOUBLE CHECK THIS COMPONENTS IF WE NEED TO REPLACE ..AA NEW REPLACE IT.. PLS. DOUBLE CHECK. U  i got my turntables repaired by these guys ...

...inside the turntable..then if its ok go to the main board  ..check the zener diode (D3)  and the transistor Q3 and Q2...the fidbk me wat hapen , if possible if you can chance it replace ...

...q2 & q3 and also the d3 and it seems that there is now power going through the turntable,but the strobe light,pitch adjuster light and also the platter will not work.I'm just wondering if ...

...at Q2 and Q3 (Regulators), those also tend to burn out at the same time. Good luck. - OPTiC Technics Repair Videos Technics DJ Repair Technics Parts DJ Parts DJ Equipment Sales Audio Video ...

...Q2, Q3 get burnt, causing this sort of issue. This is not something I would recommend fixing yourself, and I would suggest seeking professional assistance. You might also want to take a look at your ...

...Q2 and Q3. While your at it, you might want to check IC201 (Turntable Control IC), and IC101 (Turntable Drive). Doesn't sound like anything is busted just yet, if it comes and goes. This means ...

...Q2 and Q3. If you have no idea what I am talking about, then don't try to figure it out. Take it to a service center. - OPTiC The 1200s Expert www.REPAIRNYC.com Do you have the ground cable connected ...

...Q201 and surrounding areas. Resolder IC101 and IC201. If that doesn't help, Q2 and Q3, both 2SD637R, could be broken. If that doesn't fix it replace the electrolytic capacitors. Cheers john. ...