Technics SL-1200 Turntable "platter turning" Questions

...screw. Test the new belt by turning the platter clockwise two or three rotations. Belt should fit snugly and turn with little resistance. Test the replacement belt by turning the platter

platter won't turn Souds like the belt has snapped or slipped off. Lift the platter off the table. On the inside of the platter you will notice a second ring, or rim. the belt should be put on the ...

...on put wont spin.please somebody help Your turntable belt is off. Remove the c-clip holding the platter to the center spindle. Remove the platter and turn it bottom side up, place the rubber belt ...

The turntable won't spin Your turntable belt is off. Remove the c-clip holding the platter to the center spindle. Remove the platter and turn it bottom side up, place the rubber belt around the ...

turntable will not turn off Sounds to me like the belt has snapped or slipped off. Lift the platter off the table. On the inside of the platter you will notice a second ring, or rim. the belt should ...

turntable does not function Turntable Belt... Try to picture this, remove the c-clip holding the platter to the center spindle. Remove the platter and turn it bottom side up, place the rubber belt ...

numark ttx with variable torque, platter turns slowly, weak torqu i have a numark ttx with variable torque, platter turns slowly, weak torque, if platter builds up speed a finger touch to platter can ...

...Turning the platter by hand, you should see a small pulley come into view through one of the holes in the platter. You then stretch the belt slightly so that it slides over the pulley. Take care not ...

...turning. In my humble opinion if I can rewire the ribbon it may work, but I need a diagram or some guidance to do this. Your help will be appraciated...I really want to revisit some wonky LPs. Thanks ...