Technics SL-1200 Turntable "not move" Questions

...bought a pioneer turntable (PL-Z93) to go with my pioneer amp (A-717) and i fear that it will not work. Do i need a new turntable or is there a way around it? could you help me out please?? ...

Keep doing this till you get a balance of it staying in the groove and not rumbling. If the weight has numbers, in your case move it slightly to a smaller number and carry out the same tests as above

...move unless forced. Even if the arm is moved, the platter will not spin. I tried holding down the Stop/Start button, but nothing happens. Don't try and force anything that won't move. Try this. With ...

move the arm into the play position. Some turntables are manual, and do not have this feature. If yours does, the mechanism operates off a series of levers and cams that are operated off the turntable

...ant tuner fine.just turntablethis is the ps-lx250h Do you have a phonograph input on your amp? If not you may have to purchase pre amp. What type of cartridge do you have installed on the

not move over on self-start unless Thorens TD 190 turntable. Tone arm will not move over on self-start unless turntable is given a push in 33 and 45 modes. On 78, the rotational momentum is sufficient

move the tone arm to the left the turntable is not moving. what can i do? Probably a bad relay switch. Open up the turntable. Identify the motor that spins the table. Follow the wires of that motor to

...not have to move the arm of the turntable over to play I should have to hit that bottom and arm should move by it self do I have to push at bottom on the disc changer or stereo receiver so turntable ...

...you can use either on your turntable provided your amplifier has a moving coil facility? if not your limited to moving magnet type? the moving coils are more expensive and generally better ...