Technics SL-1200 Turntable "new needle" Questions

new Stylus/needle in place as shown in the below photo. hope this works for you, Cheers Emmanuel hi . The lock has a clamp arm which receives a threaded fastener and a needle tube arm which has a bore

...turntable how to install them Belt is easy, Just remove the base, and change the belt. Needle change is done by cartridge change. remove the old cartridge and insert the new one with the new

Probably the needle, I work on them and many needles are bad from new. They were put on wrong in the first place. Try taking the red part off and make sure there is a needle part and that its straight

...new needle casing and needle for record player part of this Have a Zenith product that is a record player and am/fm radio mdl#4130 sn#V0110773. Can't find this product of your site. Can you help me ...

Needle jumps on new vinyl, but plays old vinyl fine. Not faulty Vinyl as checked on another turntable and they played without jumping. Is this a weighting issue on the arm? Adjust the balance force up

...come off and you replace the whole red cartridge with the new cartridge. In your photo it looks like the needle is missing. See here for replacement: ...

...If the needle still stakes across the record check to make sure the tone arm weight is at least 1.5 grams if good you may need a new stylus or needle. a stylus and a needle are the same thing. ...

new needle for sony ps-lx250h? I was told that there are no replacement needles for the sony ps-lx250h turntable, that it is essentially a cheap disposable turntable. It was a couple hundred$ eight ...

...arm needle is there a little piece missing as the new sylus does not clip in Without looking at it no-one can tell. If you can't get it to fit then my best advice is buy a new cartridge with

...new needle but will not play This turntable has not ben used in 20 years. It seems to work and does everything but make a sound. I checked the wires and input it is connected to. The new needle is ...