Question about Crosley Audio Players & Recorders
return position is normally at the tone arm base on the left side under a rubber grommet. Use a flat blade screw driver to move adjustment screw, then test. Keep fine tuning until arm lifts at desired
...return to the arm rest. It skids across the record when returning. I believe the tone arm rest should raise up upon return, but it doesn't. The lever to raise and lower the horizontal bar works when ...
Question about Denon Audio Players & Recorders
...sale purchase but it is in the original packing and appears mint. Hi, The auto reject/auto return lever has been advanced therebt tripping the arm to return to the pick up rest.It needs
Question about Audio Players & Recorders
Picks record ,clicks twice ,returns record without playing Mechanism for moving arm over and onto record is fubar. Probably stuck and the clicks you hear are the motor fighting a losing battle and ...
...return to full resting position, when beginning to "play" it begins about an 1/8th inch too far into the album, and when the album is finished, the tone arm won't return. look on ...
return. Leave the unit off. Swing the overhead holding top arm over and manually load a record. Now switch the top arm over the niddle spindle. Make sure that the switch is set for 7", 10" or 12" (45,
...return? There should be some kind of screw on the arm to adjust it. You might have to experiment, or get a service manual. When adjusting, try doing it without the platter powered, by hand movement ...
...and sensible "head" Check the auto trip lever which should return the arm back to it's rest after the end of the record.It has possibly been advanced.Is this a belt frive or direct drive
Question about Audio Players & Recorders
...end close to the label 6. rotate the turntable by hand and it should take it through the whole return cycle of the arm and lower and finish the motion 7. then plug in and it should come back to ...
...to eswt itself. Now turn on the power and turntable. The arm should automatically return from there to its rest. Try auto operation after that. Let me know how you go. Cheers John. ...
116 questions posted
Usually answered in minutes!
325 Questions
254 Questions
185 Questions
116 Questions
97 Questions