Technics SL-1210 Turntable "record cd" Questions

...record to a CD from the "aux in" port? Your question has not provided enough information. Are you trying to record vinyl onto a cd?You cannot record onto a normal cd player. You need a cd ...

to record one CD. I have returned the unit and got a new one, same problem. Any ideas on what is wrong ? I had this problem when recording CD-Rs. I switched to CD-RWs and didn't have the problem again

...CD Record button (recording will flash on the display). The CD Record button is to the left of the fast reverse button on the unit; it is labeled Record on the remote and is below the Stop button. ...

CD recorders need you to press (and sometimes hold) the record button followed by the play button before tehy actually record anything (if you don't press the play button you will still hear sound via

...Record Recording software, browse the software cd and open the Read Me folder. I got that from the manual. You don't need a separate USB driver for it, mate, but you DEFINITELY need the cd... Hoping ...

...light on the display, and press the record button again. BE sure your using the CD -R or -RW disc and make sure to use a disc bearing the "Digital Audio" mark on it. Richard Roth The FixYa ...

record laser in the CD recorder assembly, this is common, and this is usually what it is. To this end you would need to replace this unit's laser assembly, it will/may still play a CD OK, but will

CD Record, I get the message FORBID on the screen So you want to directly record phono output on a cd, without on a dd-player? . The phono pre-amp does not only makes the signal voltage higher, it has

CD I GET ERR4 OR ERR8 MESSAGE ALL THE TIME, UNABLE TO GO TO THE NEXT STEP TO RECORD, THESE CODES ARE NOT IN THE MANUEL. THANKS JIM Is it a recordable blank CD with "audio" or "music" printed on it? It

...record and remaster it before it goes on the cd taking out all the clicks and cracks sounds and any imperfections in the sound caused by the damaged vinyl. this option could be expensive. Just type ...