Technics SL-1210 Turntable "change phono leads" Questions

...this has to be fixed properly-how can I change this lead? I have been hiring technics for years and this is a recurring problem, you have to replace the phono connection or worse the whole lead, ...

phono leads are faulty the leads are faulty and can get no sound through the red and white.can i change them myself or will i have to take them to repair shop,which i dont really want to do. If you ...

...change the phono leads on 1210 The best way it to take this device apart and soldier the new leads directly to the mainboard on the inside of the device.. GREAT TURNTABLE btw, used alot when i was ...

...phono lead how easy is it to change thanks If you have done some soldiering and have a steady hand, it's not difficult. If you are not sure, you could destroy that little circuit board that the lead ...

...input because those wont work. maybe try replace the rca cables does your stereo play your cds fine m8? if so its your rca leads or your phono ports on stereo.if not then your stereo amps fuked.gd ...

...leads, changing the phono pre amp, switching the cartridge wires, tapping the loose wires etc. the sound from the right channel is perfect, from the left it is extremely faint, almost negligible and ...

...the phono leads in different mixer channels too so theres no fault there. any ideas guys?? I'd say the cartridge is getting tired. Swap the head shells with carts and test. Cheers john. ...

...leads and I'm stuck. Does any one know of someone who could fix turntables in the south west prefrably in Plymouth Help Sam J Sam, I have a silver QFO and just recently I had problems with Phono/Line ...

...Phono leads Help!I have a problem with (one sided) sound coming through my phono leads.I replaced the suspect leads with a new set and was left with the same problem?It has nothing to do with...the ...

...change the belt on a l-a21 turn table . how do i do this? Unplug from the mains power & the amplifier phono socket To remove the plater: first remove the lid - then after securing the arm, FLIP ...