Samson SX1200 Amplifier "connect mixer" Questions

connecting a behringer djx700 mixer to a panasonic amp Hi, i have lost a lot of sound quality when connecting a behringer djx700 mixer to a panasonic amp, while playing through a turntable. The ...

...connect my samson amp to my samson MDR10 mixer? on the mixxer, use the "mix" "L" and "R" outputs. use 1/4 inch instrument cables, and connect the mox L and R to the amp's "channel 1" and "channel 2 ...

...connect the mixer to AUX channel there is no sound. What am I doing wrong? It must be connected to a master output of the mixer or the record, or second zone. Aux is an input and will not transmit ...

i have a behringer EP1500 amp, connected to a behringer mixer VMX100. i am getting a popping sound, the sound is random, it happens at various times, so i cannot say it always happens after i have ...

...connect them. Ok, this is what I did, I connected my midi player in the input of the mixer, plugged an xlr cable onto the output of the mixer and connected the end of that cable to the input of the ...

...connect to a mixer The rule of thumb is you control your audio on the low side. That means you plug your mics, tuners, audio sources into the pre-amp and then the pre-amp into the equalizer/mixer ant ...

Connecting two powered mixers I have a Yamaha emx 600 watt mixer and a Mackie 600 watt powered mixer. I want to join them together to power a loud pa with subs and speakers. Can I join these two heads

...connect the crossover. i have 2 amps, 2e.q's, a mixer, and crossover. help please!!!!. Mixer to EQ to X-over to amp to speakers the input clips at the back of the amp, can you please direct me to ...

...what it could be Probably you have a missing voltage at power supply which should be +15V/-15V connected to a number of opamps in the mixer section of the circuit, NOT in the power amp section, ...

where or how to connect 4 ch nexxtech mixer to the amp where or how to connect 4 ch mixer to the amp it it a dj setup or incar audio setup your running ?