...Clean the inside of the cover beyond throughly with metho and then sand paper. Assemble the button assembly and then with contact glue, fit in place. Use the foil tape to reinforce the bracket along ...
...clean cycle has not been in use. This feature is meant to prevent children from opening the door or using the controls on the oven. To cancel the oven lockout, push and hold "Stop" for three seconds. ...
...Clean button and rotated thermostat to Clean, but heating and locked lights don't go on. Only comes on when thermostat is nudged to Broil. And door doesn't lock. Should I go ahead? No, you should not ...
...clean it carefully with a paper towel and some alcohol, and reconnect it. To remove the cable the connector has a small flange that pops up about .05 inch whn you pull on the connector. Once it pops ...
Question about Frigidaire Kitchen Ranges
...clean mode? Try pressing and holding the “Clear/Off” button to stop any operation of the EOC. Do this at the same time while pushing and hold the light switch to the left of the door lock. Usually ...
...button to stick to the contact. On powering up our range showed PF and if you waited 10-15 secs without touching any keys F11 would display and and there was continuous beeping. I verified this was ...
Question about GE Kitchen Ranges
push button circuit board or the EC board that needs replaced? Can anyone tell me how to trouble shoot this problem? The oven doesn't work at all when this code is on. It worked fine when I cleared it
...clean using the sponge method. If this does not work, a spray-on oven cleaner can be used, according to the manufacturer's directions for a manual cleaning oven, or for a self-cleaning oven, push the ...
...clean. I can clear it by pushing the stop button. Is this something we can fix ourselves? HI.The Door switches do not agree (condition exists when door switch is closed indicating an open door, and ...
Question about GE Kitchen Ranges
...push broil or bake buttons, have manually moved oven latch back and forth. Holding down cooking time button makes door locked blink but still cannot clear. wait for timer to expire. should open after ...
100 questions posted
Usually answered in minutes!
52 Questions
40 Questions
40 Questions
26 Questions
36 Questions