Frigidaire Affinity ATF7000E Front Load Washer "broken door latch" Questions

door had broken and one of the two latch "fingers" was stuck in one of the latch openings on the washer. I fixed the problem by removing the broken part from the washer and drilling and countersinking

...broken, replace the door latch. If the door latch is ok, you might have to replace the door switch and the door latch. To replace the door switch you have to remove the front panel. Remove the two ...

...door latch is broken, it will not shut to perform cycle. Can you help? Does it never latch and run, or does it occasionally work? Have you tried pushing on the door? Does the latch make any sort of ...

...door clip was broken, it can be properly closed, so that machine does not start working with the broken door. do you mean the door latch , google the door latch as its easily replaceable an ...

...door strike seem to be broken and is that what you see inside of the latch asm.? if no the strike is ok i suspect the latch itself has broken apart and your seeing a internal part of it through the ...

...door is broken and it will not keep the door latched once the wash cycle has started. It looks like a fairly simple and small plastic part held on with (2) small screws. I went to a GE website and ...

...to operate if there is a fault or a peace of the latch has broken off the unit will read door open check the latch for any broken off peaces if it looks good replace the inter lock unit on the ...

...broken. Door lock part # WP8182634 Door latch (Striker) part # WP8181651 If it is latch striker you will see it broken and this part is in the door itself. Door lock is in the frame of the washer. ...

How do I repiace door latch Door latch is broken Open door and look for 2 screws holding lock in on the side of door, unscrew and remove broken lock!

...These are normally made of plastic and cannot be repaired. If the door won't latch and the door latch is broken, replace it. It can also be a defective main control board, but this is not