...seated and screwed in place. Don't screw it too tight though. If it still touches the top cover, sand it off or file it off. Whatever the blade touches the white portion of the cover, file it
...off without any problem; however, the center (Stainless Steel cutting blades) will not disengage. Can someone explain how to get the center pieces apart? If you don't have the orange blade tool, just ...
...Blade won't come off The spinning blade in the middle that screws down on the pulp filter will not come off. I have tried to use the little orange gadget that fits into the two holes, but it won't ...
...screw on the center of the bottom. Turn it clockwise until the blade contacts the chute, then back it off a half turn. Don't forget to tighten the lock nut. I've been using the same blade for
Question about Juicers
My Jack Lalann power Juicer has no holes. How do I get the blade out? see the 3 screws on the blade --remove them then lift off blade
...off of my power juicer i dont know how you need to help me now!!! Use the orange tool to remove the blade. I you don't have the tool, just find a big wire around 1/8 diameter. Bend it and insert both ...
...blade but can't get the filter off. Any advice or tips would be appreciated. (the company does ship parts to Canada) Thanks Chris Wear leather gloves or double rubber gloves. Hold on right on top of ...
...blade off the basket. Once you get that blade off, the rest of the juicer comes apart. The newer models come with a little tool with a couple of arms that go down into those holes and loosen the top. ...
...blade feeds pulp through slower and more evenly. With new blade I noticed uneven distribution of pulp around basket, so have to feed produce very slowly to keep juicer from flying off the
154 questions posted
Usually answered in minutes!
281 Questions
1 Questions
1 Questions
6 Questions