...RCA cables that selects between PHONO/LINE. Use PHONO level for plugging into a turntable input on a home stereo. Use the LINE level for plugging into CD/AUX/TAPE inputs. WARNING: You may damage your ...
Question about ION Audio Audio Players & Recorders
...RCA cables, that selects between PHONO/LINE. Use PHONO level for plugging into a turntable (PHONO) input on a home stereo. Use the LINE level for plugging into CD/AUX/TAPE inputs. WARNING: You may ...
Question about Technics Audio Players & Recorders
...rca contact point does look a bit let like one big secure blob. what should i do? The phono cable's do tend to fail, usually near the phono plug or under the cord clamp. The best option is to replace ...
...rca (phono) plugs on each end, but you have to get to the inside either by taking off the bottom or in some cases the body comes apart in two halves. If you get there and it turns out to be a solder ...
mixer that has a phono input.The mixer output can drive the cd input easily,as the max output from a mixer is 1.5 volts to 2 volts. Try adjusting the gain level or switching from rca phono to rca line
Question about Music Hall Audio Players & Recorders
RCA jacks (white and red jacks) coming from the unit it needs to be connected to the inputs of a stereo amplifier of receiver to produce sound. Most AM/FM receivers have inputs for phono in back. Just
...a technics turntable using a phono preamp plug the RCA phono plugs from tuntable into preamp in & then plug the preamp out to an open RCA plug on your amp or receiver like tape 1 or CD or
...RCA Phono Jacks? Does this turntable output a "Line Level" signal, or a standard millivolt level 'turntable signal'? If it is an older 'standard turntable', then you need to run it into an amplifier ...
Question about Stanton Audio Players & Recorders
...phono or RCA) If your amplifier hasn't then the sound from the cartridge on the arm won't be good quality. To make it compatible with a line input usually labelled either that or AUX ...
Question about RCA Audio Players & Recorders
...connection If your receiver only has a mini plug in you will need a phono pre amp that takes phono in and pit line level out. Then you can use an rca to mini adapter to plug into your
45 questions posted
Usually answered in minutes!
325 Questions
254 Questions
185 Questions
116 Questions
103 Questions