Technics SL-BD20D Turntable "arm lift" Questions

...on the arm there is an indexing adjustment screw. With the unit running and a record on the table, put the are into the lift area on the record and turn the indexing screw until the arm lifts

...lift the tonearm across to the record run off groove and sit it there. You may feel some resistance which is normal as the mech has to eswt itself. Now turn on the power and turntable. The arm should ...

...arm is moved over the record. As was said in the first solution, generally, cuing the tonearm, does not start the platter turning, That lever is simple a lift to cue up or down. He is also correct, ...

...arm won't lift and go to the record The turntable is always spinning and the needle arm won`t lift and play the record Pull the turntable off the mount and look at the loading mechanism, I will bet ...

lift the arm, it will turn sometimes, i was told its a switch malfunction at the back of the arm. any ideas? The problem is probably the belt. When a belt gets old it tends to stretch and/or get stiff

...The cueing arm that lift and lower the tonearm is filled with Silicone damping fluid which will dry out with times. You can also Google Silicone damping

Tone arm on technics Sl-BD22 lifts before the end of an album When playing albums the tone arm on my record player lifts and returns to original position before the album is finished. This same ...

...arm will lift up move backwards, move to original position and that's it. If done manually, needle stays in one spot, causing it to replay in one spot. Any ideas? Try adjusting the counterweight on ...

...down position.that way when you raise the lever,it will raise the arm. lift up the rubber mat and tape the platter to the side of the unit so it does not turn or fall,if you do not want to remove it

...SONY PS-LX250H for three years now, and gradually a problem has worsened where if I push start, the arm lifts up, moves to the record and begins playing, and then lifts up and returns to its holder ...