Technics SL-1200MK2 Turntable "phono cable" Questions

...basic ie; your amp is the recipient for all your cables so start with the cd cables into the cd phono inputs, then the turntable to the phono inputs. finally, your graphic into either the ...

...go.turntable slbd27u, amp suv78, cass. Deck rst18, eq ss100sl, cd sl-p127 Turntable leads go to Phono. Turntable ground lead (thin black wire) goes to screw terminal next to 'Phono' CD phono ...

...IMPORTANT: There is a switch on the bottom panel, next to the RCA cables that selects between PHONO/LINE. Use PHONO level for plugging into a turntable input on a home stereo. Use the LINE

...I don't hear sound. Suggestions? First and foremost, make sure you plug into directly to the PHONO input of your receiver. If your unit does not have a PHONO input, then you wont be able to ...

...cable. I cannot hear the bass sounds with my headphones. What is happening? Is it connected to a "PHONO" input or something not labeled explicitly for PHONO? "PHONO" is the only designated connection ...

...phono cable to see if that was the problem, and it did not cure it. I need some suggestions. If it's connected to a NON-PHONO-equipped receiver it will sound very weak and tinny for a number of ...

...silent, tinny? "There is a switch on the bottom panel, next to the RCA cables, that selects between PHONO/LINE. Use PHONO level for plugging into a turntable (PHONO) input on a home stereo. Use the ...

...cable yes you can but you will need a phono preamp such as the one found here. http://www.turntableneedles.com/Phono-Pre-Amps_c_4.html Hook the output of the preamp to Line 1 on the back of the CR515 ...

...what should i do? The phono cable's do tend to fail, usually near the phono plug or under the cord clamp. The best option is to replace the cable - look here :- ...

...phono level that is different than a standard rca line level input. Also try a different cable if the rca is not hardwired in to the turntable. The cable could be bad. If worse comes to worse upgrade ...