Technics SL-1200MK2 Turntable "off switch" Questions

...part of it is bogus. If you want, you can bypass the on off switch part with a toggle switch and continue to use the pot since it is probably still good to adjust volume. push on the button to turn ...

...Off Switch NonOp Repair?? or Replace?? Best place to Buy switch?? On Off switch non-op, where do I get a replacement you can get a replacement here: ...

I have a BSR C197 turntable and I can't switch it from "off". It spins if I manually spin it, but the switch wont move off of "off". See my previous answer adding "doesn't" work instead.

...not in connection ..( solution: move the selector switch ON and OFF 5 0r 10 times or more as long as you can.. or try to take some Multi tester to know if there a continuity of the selector ...

...off switch needs replacing Does it have a physical switch for on/off power, or are you referring to when you move the tonearm over the record? For more information, please visit my website at ...

...is cued reference 510T quadraflex I think the micro switch that operates the on off function must be out of place. You might have to go underneath the turntable to see what is happening to the

...off switch not depressing far enough to turn unit off. To remedy you need to do as follows.1. Disconnect from power supply.2. remove platter.3. Flip unit over to expose the underside and remove all ...

...off soft switch for the scratch mechanism) covering the bottom of the T and the T itself. Try powering the unit up and play a CD with the scratch mode activated. Push the grey soft switch to see if ...

...off. Swing the overhead holding top arm over and manually load a record. Now switch the top arm over the niddle spindle. Make sure that the switch is set for 7", 10" or 12" (45, 78, or 33). Manually ...

...off. I cleaned the switches with no change,speed still varies. Replace the speed selector switch, if you can still get one...They were prone to oxidation caused by gasses emitted from the rubber foot ...