Question about Dremel Tools & Hardware - Others
flexible shaft not working all-in-one rotary tool hand tool part will turn on but flexible shaft will not work anymore check and see if you have the right collet insert in the chuck if it is too big ...
Question about Dremel Tools & Hardware - Others
My Dremel tool motor still works but shaft won't turn? Moto-tool #395 by Dremel, the motor works fine but the shaft doesn't turn. Here's the email from I got from Dremel (in my case the flex coupling ...
...switch all the way back then push in the black button the switch slides over. This will lock the shaft-then use small wrench provided w/ tool to turn the collet nut on the holder below where the ...
Question about Dremel Tools & Hardware - Others
Have Dremel MOD 395 motor runs and speed control works bot shaft won't turn--worth fixing ??? and how Sounds like everything is working but shaft won't turn. Hi Larry, The tool that you ...
Question about Dremel Tools & Hardware - Others
...turning but the motor kept running. The collet was not loose and the spindle turns free by hand. I pulled on the spindle to see if the shaft may have broke. There is no play to indicate the shaft is ...
Question about Dremel Tools & Hardware - Others
...use it. The Dremel 275 (and other series) have a plastic coupler and spline that connect the motor shaft to the collet shaft (where the tools attach). The plastic fatigues and disintegrates, causing ...
Question about Tools & Hardware - Others
How can I get the flexible shaft to work on my challenge xtreme mini rotary tool? The motor works, but the flexible shaft will not turn! oil it
Question about Makita Tools & Hardware - Others
...turning motor is running sounds like a strpped gear or broken shaft. look in the gearbox where the motor shaft goes into the gearbox. if that is ok go to the where the chuck spindle comes out of the ...
flex shaft becoming hot during use, this hasn't always happened. with just a minute or less of use it is heating up to the point it can't be held remove the flex shaft from the tool and check to see ...
get a hot glue gun and go to your local hardware store and buy a piece of tubing to fit the collet shaft fill with hot glue and press it on the shaft
197 questions posted
Usually answered in minutes!
35 Questions
27 Questions
32 Questions
23 Questions